MMA Flooring

Fort Hamilton Army Base in Brooklyn, NY MMA flooring system in their hallway. This system was specified for a flooring system.

HPS Video

Existing Conditions: Before commencement this vestibule at Fort Hamilton Army Base in Brooklyn, NY had an existing epoxy floor that was failing due to a lack of surface preparation and a recommended system that did not fit its environmental concerns.  


Preparation of existing condition: Before installing any floor coating system establishing a clean and sound substrate is critical. Our prep team removed all vinyl cove and any previous coatings from the existing slab and established a mechanical profile in line with our material providers' recommendations using hand grinders with dust covers and double HEPA vacuum systems.

Products Installed: With the need to have our installation done in off-hours while creating a decorative flooring system, or more commonly an epoxy decorative flake our design team specified an MMA flooring system. The vinyl chip flooring system creates a decorative epoxy flooring aesthetic while increasing abrasion and chemical resistance. This MMA system provides the most rapid return to service where decorative epoxy flooring systems are concerned. 

Conclusion: With the timeline being our client's main concern, HPS Corp. utilized an MMA flooring system instead of a sand epoxy flooring system while maintaining the desired aesthetic. Five coat chip broadcast systems, like this one, when done with epoxy will generally take five days to install because the epoxy needs 8-12 hours cure time in between each coat. MMA resins cure in one hour allowing this entire floor to be done from start to finish in just one long day.


The start of an MMA flooring project for a military base using a one-day MMA flooring system.
mma flooring-1


Here is the vinyl chip MMA flooring system before the topcoat.
mma flooring-2


Here is the final product all competed on one day allowing a return to service with the next day.
mma flooring-3