Skip to content 
Is Epoxy Flooring Compliant with Health Department and FDA/USDA Codes?
When managing a commercial kitchen, food processing facility, or beverage manufacturing plant, passing health inspections isn’t optional—it is the foundation of your business. Standard concrete flooring, traditional tile, and grout lines are notorious fail points. Grout is porous, easily cracked, and traps moisture, grease, and food debris, creating an ideal environment for dangerous bacteria like Listeria and Salmonella.
To meet strict health department, FDA, and USDA regulations, facility operators rely on high-performance resinous systems installed by HPS Flooring. Here is how HPS Flooring systems ensure full regulatory compliance:
Completely Seamless & Non-Porous Protection
Health codes demand surface materials that are smooth, non-absorbent, and easy to sanitize. HPS Flooring installs high-solids epoxy and resinous systems that cure into an impenetrable, seamless barrier. By eliminating grout joints, seams, and cracks, these floors prevent water, fats, and organic material from seeping into the concrete substrate below.
Integrated Cove Base Systems
One of the most frequent health inspection citations occurs at the 90-degree angle where the floor meets the wall. Dirt and washdown water collect in these sharp corners, making proper sanitation nearly impossible. HPS Flooring incorporates custom seamless cove bases—curving the floor coating directly up the wall 4 to 6 inches. This creates a continuous, watertight basin that allows full washdowns without trapping debris or allowing moisture to migrate into wall cavities.
Thermal Shock & Chemical Resistance
Heavy cleaning in food service environments involves boiling water, steam washdowns, and harsh degreasers. Standard coatings can delaminate under severe thermal stress. HPS Flooring custom-engineers heavy-duty epoxy and urethane cement systems specifically designed to withstand extreme thermal shock—such as boiling washdowns under cook lines or rapid temperature drops near walk-in freezers—without cracking or lifting.
Precision Surface Preparation for Long-Term Integrity
A floor can only remain compliant if it stays bonded to the concrete. Delaminated or peeling paint creates pockets where moisture and bacteria thrive, leading to immediate health code violations. HPS Flooring utilizes industrial shot blasting and diamond grinding to achieve the exact Concrete Surface Profile (CSP) needed for a permanent mechanical bond, ensuring your floor remains intact, seamless, and compliant for years.
Custom Slip-Resistance for OSHA Compliance
While health codes focus on sanitation, workplace safety regulations mandate safe footing. HPS Flooring integrates specialized non-slip aggregates—such as quartz sand or aluminum oxide—directly into the topcoat. This produces an easily cleanable, textured finish that satisfies both FDA/USDA sanitation standards and OSHA slip-resistance requirements.
Company Details & Contact
Website: HPS Flooring Official Site
Address: 107 Cramer Ave, Green Brook, NJ 08812
Phone: 732-384-5577