Warehouse Floor Painting

HPS Video

Existing Conditions: This project involved the re-purposing of a refrigerated storage facility, using a warehouse floor coating in New Jersey to turn it into a food processing/production facility.

Preparation of existing condition:  Our design team created the trench drain layout to meet up to multiple evacuation points. They also optimized the pre-existing slope by using internally pitched drain segments. The concrete was saw cut and excavated to receive the drain sections. Next, all of the trench drains were set in place and secured so that they wouldn’t move while the concrete fill was applied. Once the drains were set and the grind and seal concrete phase complete, the floor application began for our hybrid resinous flooring system.

Products Installed: Once all the prep was completed we applied the system base-coat of urethane cement slurry and broadcast into it using flint shot to create an anti-slip texture. Once the base-coat was cured we ran hand-stones over the floor to ensure an even texture.  Once that was complete we applied the urethane cement topcoat for added protection and scratch resistance.​

Conclusion: As a warehouse flooring contractor we were able to come in and complete this urethane cement floor installation in under 72 hours. This flooring system will hold up against the extreme cold and provides a durable long-lasting warehouse floor painting system.


This project involved installation of food grade trench drainage, as well as substrate preparation for our refrigerated warehousing floor painting project.

warehouse floor painting-1


This was the urethane cement flooring system with just a grout or seal coat, of which was like uretahen cement chemistry..

warehouse floor painting-3


The finished warehouse floor painting system, after applying the final coat of urethane coating to increase scratch resistance and sheen retention.

warehouse floor painting-3