Epoxy Flooring Company NJ

Project Overview: 27,000 SF Epoxy Slurry flooring installation for a Generator Station.

Existing Conditions: ConEdison contacted the best epoxy flooring company has to install the epoxy flooring in a new power station that would be providing power for New York City. This space would house a massive generator and it’s fixtures. They needed a floor that would remain strong for a long time because it would be sitting under equipment that could not be moved. This project was new construction so our initial preparation was minimal.

Preparation of Existing Conditions: We performed a diamond grinding procedure on the entire substrate to ensure a good bond for our epoxy floor coatings. We also edged out the drains and perimeter with hand grinders. We then created keyed edges at all of the termination points such as at doorways and around drains. 

Video Thumbnail.png

Products Installed: To produce the finished floor, we first primed the surface with an epoxy primer. Once the primer was within the cure window we installed the Trafficote 105 epoxy flooring system. Trafficote 105 is an epoxy slurry that creates a 1/8″ flooring surface. We also broadcast 40-60 mesh silica sand into the epoxy to give the floor some texture and add to its strength. Finally, we sealed the system by top-coating it with GP 3744 top coat

Conclusion: Working together with our client and installation team we were able to complete this installation during Con Edison's holiday shutdown allowing them to be back on their floor fully operational when they got back in after the new year. To see more from the number one epoxy flooring company has to offer -  give us a call today!


High-Performance Systems Corp.

A leader in protective flooring since 1988

436 Lincoln Blvd. 
Middlesex, NJ 08846



  • Facebook
  • YouTube
  • Instagram

Privacy Policy